| | |
|
Independent Door Controller
The independent door controller may be used for access control
applications where a log of the access point activity is not
required and where there is no reason for communications with
a host computer. The controller is programmed either via the
media interface or through the 2 wire RS485 channel. The
independent access controller may be configured to operate with standard FASE
equipment.
All models support:
- Storage for 2000 badges (depending on data length)
- 2 egress inputs per door
- 1 disable input per door, for connection to time switch (not supplied)
- Tamper switches.
Independent Door Controller Models
| DIOB-500 |
1 door, single reader, bar-code |
| DIOB-501 |
1 door, dual reader, bar-code |
| DIOM-500 |
1 door, single reader, mag-stripe |
| DITB-500 |
2 door, two reader, barcode |
| DITM-500 |
2 door, two reader, mag-stripe |
|
|
| | |
|
|
| Mounting TemplateTMPL-003-01 - Cable Entry & Fixing Details for Door Controller
  | | | | Related DocumentationMAN005-19 - Door Controller Installation & Maintenance Guide
| | | | Related Softwarefamstest.zip - A utility to test a network of FAMS terminals
 dstconfig.zip - A simple program for configuring a terminal fitted with a Lantronix ethernet card
| | |
|
